The smelting of zirconia ceramic parts includes many processes, so we must pay great attention to every step, so as to ensure a solid quality. Regardless of whether the intermediate frequency induction furnace or the intermediate frequency furnace is used for smelting, alloy steel has been smelted first, and various ferromanganese and other precious alloy products must be scored several times, each time a small amount of blending is added, precious elements are added to reduce ablation. The material block should be as small as possible, preferably 50-80mm.
Zirconia ceramic rods are the key metal oxides of zirconium. Generally, they are milky white, odorless and odorless crystals. They are key high temperature resistant materials, porcelain insulation materials and porcelain sunscreens. Zirconium oxide is very common in daily life. It has good mechanical ceramic parts strength at room temperature in ceramic center rod products. And it has the properties of low thermal conductivity and high toughness

The development, design and application of zirconia ceramic plungers with good performance increase the service life of key components in oil mining machinery and equipment, and reasonably reduce the frequency of shutdown and pump inspection, which will cause large economic benefits. Ceramic plungers have broad marketing prospects and application value at the level of heavy oil extraction.

At the level of acting porcelain, the heat-resistant characteristics of zirconia ceramic parts are used as electromagnetic induction heating tubes, refractory insulation materials, and hot components. Zirconia ceramics have relatively sensitive electrical technical parameters, and are mainly used in oxygen sensors, solid metal oxide solid-state batteries (SolidO xideFu elCe ll, SO FC), and high-temperature heating elements. Zr02 has a relatively high refractive index (N-21 ^ 22). Adding certain chromogens (V205, Mo03, Fe203, etc.) to the fine zirconia powder can make it colorful and transparent Polycrystalline Zr02 raw materials